How to Connect Soundcore Headphones: Step-by-Step Guide

To learn how to connect soundcore headphones, simply put your device into pairing mode—usually by holding the power button or the charging case button for 3 to 5 seconds until the LED flashes blue—and then select the headphones from your device’s Bluetooth settings. This process works consistently across popular models like the Soundcore Liberty 4, Space One, and Life Q30.

Quick Summary: Key Takeaways for Soundcore Pairing

If you are in a hurry, here is the essential information for getting your Soundcore audio gear connected in seconds.

How to Turn On Soundcore Headphones and Enter Pairing Mode

Before you can sync your audio, you must know how to turn on soundcore headphones and trigger the discovery state. The method varies slightly depending on whether you own over-ear headphones or true wireless earbuds.

Over-Ear Headphones (Life, Space, and Vortex Series)

For models like the Soundcore Life Q35 or Space One, the power button is your primary tool.

1. Locate the Power Button on the left or right ear cup.


2. Press and hold for approximately 3 seconds to turn the power on.


3. If it is your first time, they should enter pairing mode automatically.


4. For manual pairing, hold the power button for 5 seconds until the LED light flashes Blue rapidly.

True Wireless Earbuds (Liberty, Sport, and P-Series)

For earbuds like the Soundcore Liberty 4 NC, the charging case acts as the pairing hub.

1. Open the charging case lid.


2. Keep the earbuds inside the case.


3. Press and hold the Setup Button on the case for 3 seconds.


4. The internal LEDs will flash to indicate they are ready to be found.

How to Connect Soundcore Headphones to iPhone

Connecting to an iOS device is a seamless process. Once you have initiated pairing mode on your Anker Soundcore device, follow these steps on your iPhone or iPad.

1. Open the Settings app on your iPhone.
2. Navigate to the Bluetooth section and ensure the toggle is switched to On.
3. Under the “Other Devices” list, look for your specific model (e.g., Soundcore Liberty 4).
4. Tap the device name.
5. Once the status changes to Connected, you are ready to listen.

Expert Tip: If your iPhone cannot see the headphones, try toggling Bluetooth off and on again. Apple devices sometimes experience “cached” Bluetooth lists that require a refresh to show new devices.

How to Connect Soundcore Headphones to Android

Android devices, especially those running newer versions of the OS, may support Google Fast Pair with certain Soundcore models.

1. Swipe down from the top of your screen to access Quick Settings.
2. Long-press the Bluetooth icon.
3. Tap Pair new device.
4. Select your Soundcore bluetooth headphones from the list of available devices.
5. Confirm any pairing prompts that appear on the screen.

Using Soundcore headphones on Android allows you to utilize the LDAC codec on supported models (like the Liberty 3 Pro), which provides significantly higher audio resolution than standard Bluetooth.

How to Connect Soundcore Headphones to Laptop

Many users ask how to connect soundcore headphones to laptop for Zoom calls or focused work sessions. The process is similar for both Windows and macOS.

Connecting to Windows 10 & 11

1. On your PC, go to Start > Settings > Bluetooth & devices.
2. Click the Add device (+) button.
3. Select Bluetooth from the list of device types.
4. Ensure your headphones are in pairing mode.
5. Click on the Soundcore device when it appears.

Connecting to macOS

1. Click the Apple Menu and select System Settings (or System Preferences).
2. Click on Bluetooth in the sidebar.
3. Find your Soundcore model in the “Nearby Devices” list.
4. Click Connect.

Note: If you experience audio lag on a laptop, ensure that the “Hands-Free AG Audio” profile is not selected as your primary output, as this is intended for low-quality voice calls, not music.

Enhancing the Experience: How to Use Soundcore Headphones with the App

Knowing how to use soundcore headphones to their full potential requires the official Soundcore App (available on the Apple App Store and Google Play). This is a critical step for modern users.

Why You Should Use the App

• Firmware Updates: Fixes connectivity bugs and improves battery life.
• Custom EQ: Access HearID to create a sound profile tailored to your hearing.
• ANC Control: Switch between Transport, Indoor, and Outdoor noise-canceling modes.
• Button Mapping: Change what a double-tap or long-press does on your earbuds.

Steps to Connect to the App

1. Pair your headphones to your phone via standard Bluetooth settings first.
2. Open the Soundcore App.
3. Tap Add Device.
4. The app will scan and identify your connected model.
5. Follow the on-screen prompts to register the device.

Mastering Multipoint Connection

One of the best features of high-end Soundcore gear is the ability to connect to two devices simultaneously. This allows you to listen to music on your laptop and automatically switch to your phone for an incoming call.

1. Connect your headphones to Device A (e.g., your smartphone).
2. Put the headphones back into pairing mode.
3. Connect them to Device B (e.g., your laptop).
4. In the Soundcore App, look for the Dual Connections or Multipoint setting to ensure both are active.

Pro Insight: Using LDAC high-resolution audio usually disables Multipoint connectivity due to bandwidth limitations. If you can’t connect to two devices, check if LDAC is enabled in the app.

Troubleshooting: Why Won’t My Soundcore Headphones Connect?

If you are struggling with how to connect to soundcore headphones, the issue is usually a “stuck” pairing state. Here is how to fix it based on my years of testing Anker products.

Perform a Factory Reset

This is the “nuclear option” that fixes 99% of sync issues.

• For Earbuds: Place them in the case, leave the lid open, and hold the case button for 10 seconds until the LEDs flash red three times.


• For Over-Ears: Plug the headphones into a charger and hold the Power and Volume+ buttons simultaneously for 5 seconds.

Clear Bluetooth Cache

Forget the device from your phone’s Bluetooth list (“Forget this device”) and restart your phone before trying to pair again.

Check for Interference

Bluetooth operates on the 2.4GHz frequency. Move away from Wi-Fi routers, microwaves, or other wireless peripherals if the signal is dropping during the pairing process.

Frequently Asked Questions

How do I put Soundcore headphones in pairing mode?

For most over-ear models, hold the power button for 5 seconds. For earbuds, place them in the case with the lid open and hold the button on the case for 3 seconds. The LED will flash blue when ready.

Can I connect Soundcore headphones to a Smart TV?

Yes, if your TV has built-in Bluetooth. Go to the TV’s Audio/Sound Settings, select Bluetooth Speaker List, and put your Soundcore device into pairing mode to sync them.

Why is only one Soundcore earbud working?

This usually happens when the earbuds de-sync from each other. Place both back in the case, perform a factory reset by holding the case button for 10 seconds, and then repair them to your phone.

Do Soundcore headphones work with PS5 or Xbox?

PlayStation and Xbox do not support third-party Bluetooth headphones directly for game audio. You will need a Bluetooth transmitter plugged into the console’s USB port or controller’s 3.5mm jack to connect your Soundcore bluetooth headphones.

How do I update the firmware on my Soundcore headphones?

Download the Soundcore App, connect your headphones to your mobile device, and check the “Update Firmware” section in the device settings menu within the app.